360 York Road, Niagara-On-The-Lake, Ontario, Canada

LACM Valve

Part# AL091

This valve is used to control the lift axle. The valve will lift and lower the axle based on the pilot pressure. Once the axle is lowered, the ride bags pressure will match the pilot input.


This valve is not inlcuded in the Kits above because most trucks with factory installed lift axles, will already have one installed.

Proviso Plus P200M No Kit

Part# PU7-200M-NK

The kit includes:

  • Proviso Plus P200M module Only
  • RS232 Plug
  • Rubber Air Sensor Cover
  • Power Harness Lead

Proviso Plus P200ML Encoder Kit

Part# PU7-200M-ETCB

The kit includes:

  • 10"x8" Stainless Steel Box with valves installed
  • Proviso Plus P200M and Interface modules installed in the box
  • P200 Wheel Sensor and Decal Kit
  • Power Harness Lead
  • 1/2 Gallon air tank and Drain Valve
  • Encoder Extension and Splitter Cables
  • 2x Encoder Sensors and Linkage Kits
  • Mounting Brackets for Tuftrac and T-Ride Suspensions


The kit does not include:

  • The LACM Valve

The Proviso Plus P200M Kits

P200 Wheel Sensor and Decal Kit

Part# AL022-512

The kit includes:

  • AL200512 Drum Brake Sensor
  • ABS Sensor Clip
  • Wheel Sensor Mounting Block
  • Wood Installation Tool
  • Warning Decals


Also available with a Disc Brake Sensor (AL022-812)

Proviso Plus P200ML Walking Beam Kit

Part# PU7-200M-WHCB

The kit includes:

  • 10"x8" Stainless Steel Box with valves installed
  • Proviso Plus P200M and Interface modules installed in the box
  • P200 Wheel Sensor and Decal Kit
  • Power Harness Lead
  • 1/2 Gallon air tank and Drain Valve
  • 2x Load Cell Sensors and Mounting Hardware
  • 2x 20ft Extension Cables


The kit does not include:

  • The LACM Valve

Proviso Plus P200ML Frame Kit

Part# PU7-200M-FCB

The kit includes:

  • 10"x8" Stainless Steel Box with valves installed
  • Proviso Plus P200M and Interface modules installed in the box
  • P200 Wheel Sensor and Decal Kit
  • Power Harness Lead
  • 1/2 Gallon air tank and Drain Valve
  • 2x Frame Sensors and Mounting Hardware
  • 2x 20ft Extension Cables


The kit does not include:

  • The LACM Valve

(905) 641-0024